Parts

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6803 Bearing

Dimension Seatpost Binder Bolts - 16g

Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp. - 31.8mm can be used with 26.0 bars with additional shim (SM5317) - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Weight: 130g-180g

Dimension Steerer Extender adds 2 to 3-1/4" height to steerer. - Extender clamps to steerer; stem clamps to extender - Adds 2 to 3-1/4-inch height to threadless steerer - Includes top cap and long bolt - 40mm of threadless steerer is required for proper installation - Do not stack steerer extenders; no more than one steerer extender recommended per bike - WARNING: Dimension Steerer Extender is not recommended for use on forks with carbon fiber steerers

Features and Benefits - 250cm in Length—accommodates bars up to 50cm - Grip compound maintains traction when wet - Durable stretch for installation - Vibration-damping backer strip - Hard-wearing construction - 3mm thick What It Is ENVE-designed bar tape that provides maximum ride feel without compromising comfort and ensures grip in wet conditions. 250cm in length, 3mm thick, and silicone-backed compound that provides the right amount of stretch for ease of installation and durability. Science & Insight For ENVE, handlebar tape is more than a fashion accessory; it is a key component that sets the tone for your ride. Bar tape that becomes slippery when wet and causes discomfort diminishes confidence and the ride experience. As such, ENVE Handlebar Tape is designed with a grip compound that ensures bare-handed traction despite wet conditions. To maximize ride feel without compromising comfort, ENVE Handlebar Tape is 3 millimeters thick with a vibration-damping silicone backer strip that ensures comfort for long miles over rough roads.

Best suited for the acknowledged weight weenie and thin grip lovers. 50 grams, standard grip length - 5 1/8", installed DIA. 30 mm, weight plus or minus 5%, 1 set of bar plugs included. - 50 Grams - Standard Grip Length – 5 1/8" - Installed Dia. 30mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation

- Grade 10 chromium steel balls

- Grade 10 chromium steel balls

High-quality replacement headset bearings are smooth like butter. - Sealed cartridge bearing for long life - Durable steel bearing housing

More support with more comfort Why not combine the best? With the GA3, the winged grip has proven its genius to the All-Mountain world. The special thing about the GP1's off-road cousin is, he locks on tight with a lightweight inner clamp. The concept combines all the relief benefits of the wing and actively supports your wrist. Your freedom of movement and the accompanying bike control remains fully intact. Riding pleasure guaranteed! What exactly are the benefits of the wings on the grips? The longer a ride is, the harder it is for a rider to maintain the ergonomically correct hand position on the bike. As a result, riders often bend their wrists too much, stressing nerves and tendons and inhibiting blood circulation. Numbness and pain in your hands are often the undesirable consequences. The GA3 grip optimizes the hand position through the Miniwings and prevents over-bending in your wrist. What is the carpal tunnel? The carpal tunnel is an anatomic passage in your wrist for nerves and tendons running from the lower arm to the hand. If the wrist is bent too much the nerves become constricted, which often leads to pain and numbness. The GA3 with Miniwing is based on the well-established and proven design of the MTB-specific GA2 grips. The particular shape of the grips provides you with great comfort and grip, without compromising the freedom of movement. This allows you to have all the control you need to tackle the most demanding of trails with full confidence. As an ergonomically perfected expansion of the GA-series by Ergon, the primary purpose GA3 grips is to provide relief out in the trail. But, they're not only perfect for the MTB category, they are also ideal on fitness-oriented and urban bikes. The ergonomic winged-grip GA3 is available in five striking colors. Ergon grips don't just feel great, they look great, too!

The original ergonomic grip – continually improved over the last few years. As the worldwide standard in ergonomic function, materials and quality, the GP1 has a new internal structure. More comfort is ensured by the three-part internal support platform with varying wall thickness. German-made rubber compound is of the purest quality. Forged aluminium clamps, unlike the pressed clamps preferred by the copies.

Ergon GP1 Grips feature an anatomical design that eliminates pressure on the nerves in your hands and creates a natural wrist angle for the ultimate in comfort. Complementing the sweet feel, these great grips also offer excellent pressure distribution with 100% support for your hands versus the 60% support you get from conventional models. You get more grip to hold on to, which improves your control for all types of riding — even technical off-road use. Ergon grips also boast built-in bar clamps for fast and secure installation. Try them today!

Performance and comfort for mountain biking. Developed as an all round saddle, ideal for long day tour riders and those wanting more cushioning. The ergonomic focus of the SMC3 Pro saddle is optimized relief for the soft tissue. The specially designed shape and the pronounced relief channel are ideal for those with sensitivity in this area. Newly developed, high damping ortho- paedic padding with micro air cushions is utilized.

Performance and comfort for mountain biking. Developed as an all 'round saddle, ideal for long day tour riders and those wanting more cushioning. The ergonomic focus of the saddle is optimized relief for the soft tissue. The specially designed shape and the pronounced relief channel are ideal for those with sensitivity in this area. Newly developed, high damping orthopaedic padding with micro air cushions is utilized. Compared to the SMR3, the saddle is softer and thicker. TiNox rails twinned with a fiberglass comfort composite shell. Cushioning and shell geometry shared with the Pro model.

The Ergon grip with a full size, multi-position bar end for maximum hand positions, increased leverage, and stability when climbing or during out-of-the-saddle cycling. Perfect for commuting, touring, or for those who like a longer bar end. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP5 eliminates numb hands, aching fingers, and tired forearms. The GP5 is made from 100% German, TÜV-certified rubber compounds of the purest quality. - Not suitable for use with carbon handlebars - Uses: touring, commuting - Clamp: fiberglass composite with rubber inserts

- AL6061-T6 lightweight alloy construction - Fits 22.2mm diameter bars - Length: 130mm - Weight: 127g

- Soft Kraton rubber construction - Multi-taper ergonomic shape for enhanced comfort - Hexagonal texture for superior all-weather grip - Easy-install, lock-on design - Single locking alloy clamp - End plugs included - 130mm

- Forged alloy body - Large contact surface, 95 x 95mm - Replaceable pins - 9/16 Cr-Mo axle - 462g

Rebuild seal kits for Fox rear suspension service and repair. - Includes parts needed for rebuild

FSA bearings that set directly into the frame without the use of pressed in cups. - 36/45 degrees is Cane Creek-compatible - 45/45 degrees is Campagnolo-compatible

- Left and right bottom bracket cups with standard bearings for FSA MegaExo cranks - BB-9050 is for 24mm spindle 68/73mm MTB K-Force and Team Issue cranks - BB-8681 for K-Force Light (a non-ceramic option) and SLK Light Road MegaExo cranks (BB-8681 bearing covers have been redesigned so that the spindle now rides directly on the bearing itself) - BB-7000 is for 24mm spindle 68/73mm shell MTB Gravity Lite, Moto X and Afterburner cranks - BB-7000 is for 24mm spindle 83mm shell MTB Gravity Lite cranks - BB-6200 is for 24mm spindle 68mm shell Energy, Gossamer and Omega No Bolt Design cranks - BB-6000 is for 24mm spindle 68mm shell Energy, Gossamer and Omega cranks - BB-4000 is for 19mm spindle 69mm shell Omega cranks - BB-1000 is for 19mm spindle 68/73mm MTB Gamma cranks - 1.37" x 24tpi (English threads) or M36 x 24tpi (Italian threads)

Rally RS100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes. - Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally RS100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately). - Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite Shimano SPD-SL cleats. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) or CR1/3N (x2) - Battery life: up to 120 hours - Maximum rider weight: 105kg - Accuracy: +/- 1% - Field calibration - Adjustable release tension - Measurement location: spindle - Communication: ANT+ and BLUETOOTH - Weight: 328g - Water resistance: IPX7 - Cleat type: SPD-SL - Q-factor: 53mm (55mm with provided 2mm washer) - Stack height: 12.2mm In the Box: - Rally RS100 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

Rally XC100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes. - Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally XC100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately). - Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite Shimano SPD cleats. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) - Battery life: up to 120 hours (with LR44 battery type) - Weight: 316g - Water resistance: IPX7 - Max. rider weight: 105kg - Accuracy: +/- 1.0% - Cleat type: Shimano SPD - Q-factor: 53/55mm with supplied spacing washer - Stack height: 13.5mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth In the Box: - Rally XC100 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

Jagwire's Aluminum Housing Connectors allow joining two sections of the same-size cable housings together in case you only have shorter sections and you need to make a longer one. It comes in 4 and 4.5mm diameters. Match the diameter of the housing sections on your bike. - Comes in a pack of 10

Extend housing runs using these double-ended junction end caps.

Jagwire's EZ Handle Single End Straddle Wire is a replacement straddle wire (also called a crossover or transverse cable) for cantilever brakes.

Jagwire's Universal Pro End Cap Packs contain a complete selection of aluminum housing ferrules and cable end caps (crimps) so that you can properly setup your cables and housing sections and prevent fraying cables. They come in 6 colors for customizing your ride, too. - 4mm for use with solid color shift housing - 4.5mm for use with braided shift housing Each kit includes: - Ten shift housing sealed end caps (ferrules) - Six 5mm brake housing open end caps (ferrules) - Four cable caps (crimps)

Jagwire's Brake Noodles feature stainless-steel tubes with aluminum ends for durability and excellent performance. You get 10 of them for all your bicycle setup needs.

Many frames use internal cable routing for a tidy appearance and improved aerodynamics. In some cases, this can cause unwanted rattling sounds when riding over rough surfaces. Jagwire's Internal Housing Damper slides over brake and shift housing or hydraulic hose to reduce this noise. - 10mm outside diameter - Compatibility: 4.0-5.0mm brake housing, shift housing, and hydraulic hose

Pro Extreme Sintered pads feature an aggressive compound that provides maximum stopping power making it perfect for DH riding. The dense, sintered compound also resists water making it extremely effective in wet conditions. - Compatible with Shimano R9170, Metrea U5000, Ultegra R8070, and Road RS305, RS405, RS505 and RS805 - Compatible with Rever MCX1 Flat-Mount and MCX2 Flat-Mount

- Compatible with Shimano HG40/50/70/90 chains - KMC Z50, Z7, Z8, X8.93, X8.99 chains - Reusable - No Tool Required - Pin Length: 7.3 mm

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC and Shimano 10-speed chains - Includes 2 pairs

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with Shimano, SRAM, and KMC 11-speed chains

The Continental is Kool-Stop's classic conventional design, for use on older bicycles or brake systems with clearance problems. Great for City Bikes and steel rims. Features: - Internal backbone - Nyloc retaining nut - Thicker pad Specifications: - Weight per pair: 41.6 grams - Overall length: 45.5mm - Pad contact width: 9.4mm

The Eagle 2 is a revolutionary pad that first utilized the hardened reinforced steel internal backbone. This larger pad has been used in all areas of cycling and is a good choice when frame, wheel and fork design allow. Features: - Hardened and Plated reinforced steel backbone - Patented Angled tip plow - Water grooves - Pad-Lock washer system - Available in Threaded and 2024 Aluminum Smooth Post Black: standard compound designed for dry condition riding Red: semi-aggressive compound for good performance Salmon: aggressive compound for extreme weather conditions Dual: combination of Salmon and Black compounds for more controlled, smoother stopping

The DELTA standard requires a rotational movement of the foot toward the outside or inside for disengagement. This function improves cyclist's safety; no body or bearing prevents disengagement toward the inside. Compatible with non-KEO LOOK pedals, their contact area is wide for optimal comfort. They also feature a memory positioner to aid when changing cleats. - Use: Road & Indoor Bike - Material: Polyacetal + PTFE - Lateral adjustment: 4mm - Longitudinal adjustment: 12mm - Weight (pair + fasteners): 75g

The KEO GRIP cleats closely resemble the KEO CLEAT model, yet they boast the added feature of a TPU layer on the shoe side which prevents the risk of cleats sliding on carbon soles. Their anti-slip surface on the pedal side offers extra safety and stability when walking. - Use: Road - Material: Polyamide + TPU - Lateral adjustment: 4mm - Longitudinal adjustment: 9mm - Weight (pair + fasteners): 68g

The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light and durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.

Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm

The Problem Solvers Steerer Tube Shims are for installing 1-1/8-inch diameter threadless stems on 1-inch diameter threadless forks. The shim is made of light, durable anodized aluminum and is chamfered on the ends for easy stem installation.

The Problem Solvers Center Lock Adapter Kit allows riders to use 6-bolt rotors on Shimano Center Lock compatible hubs. - Not intended to be used with rotors over 180mm in diameter - Made of extruded, CNC-machined, and broached AL-6061-T6 - Designed for use with Center Lock hubs and 6-bolt disc brake rotors

Riser kits increase stack height to fit a wide range of riding styles for efficient positioning; compatible with ZBS Aerobars, T Plus Carbon Series Aerobars, T Plus Aluminum Series Aerobars, Supersonic Aerobars, Sonic Aerobars, and Subsonic Aerobars. - Multiple kits can be used to reach desired height up to 80mm rise - Raises armrest and extensions together to maintain a comfortable wrist position - Kit includes a pair of risers, bolts specific to riser size, and mounting hardware - Risers are compatible with J2, J3, and J4 Aerobar brackets - Clamp diameter: 31.8mm

Profile's Ultra FR is a tough riser bar that gives you extra control in technical sections and confidence on rough descents. It's made of double-butted 6061-T6 aluminum, which offers superior strength and stiffness and weighs next to nothing.

The Airstryke II takes the features of the ever popular Airstryke and adds an expanded fit range and more comfortable armrest. The flip up bracket and classic shape are retained. Performance The Airstryke II is intended to allow riders to add aerobars to their road or adventure bike without sacrificing the ability to hold the bars close to the stem. The comfortable grip angle and smoothly curved armrest offer a relaxed position for long days in the saddle. Fit Data - Armrest Offset: -85mm to 17.5mm in 7.5mm steps - Armrest Width: 131mm to 298mm in 18.5mm steps - Armrest Stack: 40mm Origin As one of the most popular model in the history of aerobars it seemed appropriate to update the much loved Airstryke with our new generation fit range and comfort focused armrest. We didn't want to change the elements that have made the bar so successful and the changes made just enhance the adjustability and comfort. - Bracket: L2 Flip-Up - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo Armrest - Armrest Stack: 40mm - Reach: -85mm to 17.5mm in 7.5mm steps - Extension Adjustment: 150mm (center of basebar - end) - Armrest Width: 155mm - 203mm - Weight: 592g

Proven time after time to be a reliable, easily adjustable system that continues to outperform the competition, the 4-Axis stem is a surefire go-to for an entry level stem that has world-class performance. - Bar Clamp Diameter: 31.8mm - Material: Alloy - Stem Angle: 30 degrees - S.H.I.S. Stem Clamp Diameter: 28.6

Replacement lower hardware for Rockshox forks.

RockShox 30mm Seal Kit

Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No

- From a long line of tough, light-weight chain engineering from SRAM - Chain connector type: PowerLock - For Use with SRAM 12-Speed Road Chains Only - No tools necessary to install - Chain connector qty/packaging: 4

These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.

SRAM's 3.0 Twist Shifters are simple to use and offer solid shifting and reliable construction. Using SRAM's 1:1 actuation ratio technology, the 3.0s are easy to set up and easy to adjust. Plus, with a simple twist of the wrist, you can shift a handful of gears at once.

SRAM's MRX Comp Twist Shifters are simple to use and offer solid shifting and reliable construction. They shift a 2:1 Shimano rear derailleur.

- For either front or rear shifter - Road & MTB compatible - 1.1 polished stainless steel cable

SRAM's PC-1 Single Speed Nickel Chain is designed for singlespeed bicycles so it won't jump off when you're laying down the power. It comes with a connector link for easy installation and removal.

SRAM's PC-850 Chain makes a trusty partner over hill and dale. It's easy to install, too, thanks to the no-tools-needed PowerLink. Quiet, smooth, reliable and very affordable, the PC-850 is a fine value.

SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD). - For use with Level Ultimate & Level TLM Brakes - Pad Material: Organic - Type: Road/CX - Includes guide pin, clip, & pad spreader

SRAM's Disc Brake Pads are reliable and rugged. These pads are compatible with Avid Trail and SRAM Guide and G2 disc brakes.

Paceline disc brake rotors incorporate the elegant design of our eTap AXS road groupsets and feature a new brake track vent design for smooth, quiet braking performance. - Designed for road use - Paceline brake track offers quiet brake operation