Wheels

Kids wearing out their Strider? That's a good thing! Upgrade their out-of-doors adventures with these aluminum wheels. These lightweight 12-inch wheels are a great upgrade for trail riding and come with tires and tubes.

Whether you're touring, building the ultimate commuter or just want excellent stopping power on the road, Bontrager's Select Disc Road Front Wheel is a sweet choice. Free speed will be yours thanks to the low-profile aero rim and 24 spokes that aren't afraid of rough roads. Plus, the hub is easily serviced and features polished, ground bearing races, a forged shell and a chromoly axle for top-notch durability.

Zipp makes the impossible possible with their 303 Firecrest Carbon Disc Brake wheels—they're equally at home on the flats as they are in the mountains. The 45mm-deep rims slice through the wind more efficiently than even many deep-section wheels thanks to their 28.5mm-wide dimpled rims. And, by creating a seamless junction between rim and tire, the increased width further reduces drag. The 303s climb with the best and re-accelerate out of corners like rockets since they barely register on the scale, which makes them a must-have on undulating terrain. The extra wide rim also allows running wider tires at lower pressures with less fear of pinch flatting, which boosts ride quality and comfort and reduces rolling resistance. Plus, Zipp's 77D/177D disc hubs gives you incredible stopping power in wet and dry conditions alike, and they're thru-axle compatible (sold separately) for jaw-dropping steering precision and power transfer. You also get Sapim's oustanding CX-Ray spokes.

Full-carbon, 50mm deep tubeless-ready disc brake wheel that perfectly balances durability, weight, and aerodynamics. Proven, tested design for the perfect upgrade There has never been a better time to upgrade to the feel and performance of carbon wheels. Aeolus Pro 5 TLR is a full carbon, tubeless-ready disc brake road wheel that balances durability, weight, and aerodynamics for pro-level performance that doesn’t break the bank. We started with a proven 50mm-depth shape and added the versatility of disc brake hubs to make a carbon road wheel available to all. Product details - D3 Dual Directional Design profile cuts drag at tire-leading and rim-leading edge - OCLV Pro carbon offers an optimized blend of weight, stiffness, and durability - Tubeless Ready (TLR) rims allow for quick transition to tubeless system - Stacked lacing alignment provides a better spoke bracing angle for a stiffer wheel - 50mm depth OCLV Carbon rim (27mm outer, 19.5mm inner width) DT Aerolite spokes and Alpina locking nipples - Center lock disc hubs with 12mm thru-axle front and rear, Bontrager 24 point engagement, 3 pawl hub - Compatible with Shimano 10/11 speed, SRAM 10/11 freehubs, axle swap kit available for quick release and 15mm - Includes TLR rim strip, TLR valve, valve core removal tool, and traditional rim strip

Whisky's No.9 100w rim has a 94.5mm inner width to maximize the footprint of fat tires up to 5.05-inches wide. Its double-wall construction makes it a unique, one-of-a-kind carbon fat rim. It supports the structure of the tire’s sidewall for a stable, traction-laden ride while simultaneously improving your float on snow and sand. If you’re looking for the best in winter traction, the No.9 100w has you covered.

Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.

Affordable Aero Combine state-of-the-art aerodynamics with the benefits of tubeless ready, and you've got the Aeolus Comp 5 TLR road wheel. A classic aluminum rim with a seamlessly attached 50mm carbon fairing combine for a proven aero profile that has been wind tunnel tested to be incredibly fast. Aeolus Comp 5 TLR is a proven high-value option for the aero-conscious rider. Key features - Rim construction combines lightweight aluminum rim with a bonded carbon fiber fairing - Tubeless Ready (TLR) rims allow for quick transition to tubeless system - Aluminum with carbon rim construction (23mm outer, 17.5mm inner width) - Compatible with Shimano 10/11 speed, SRAM 10/11, - Includes Bontrager TLR rim strip, TLR valve stem, internal cam quick release, and traditional rim strip - DT bladed spokes 18fr, 24r, Alpina locking nipples - No rider weight restrictions

Whisky Parts Co. Tubeless Rim Tape.

Booster thru-axle hub spacer kits are designed to give your non-Boost front and rear thru-axle hubs the boost they need to fit any Boost-compatible frame or fork.

Whether you're touring, building the ultimate commuter or just want excellent stopping power on the road, Bontrager's Select Disc Road Rear Wheel is a sweet choice. Free speed will be yours thanks to the low-profile aero rim and 24 spokes that aren't afraid of rough roads. Plus, the hub is easily serviced and features polished, ground bearing races, a forged shell and a chromoly axle for top-notch durability. And the 130mm and 135mm Over Locknut Dimension (OLD) hub options makes these wheels usable on both your road or cyclocross frames.

Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 746 rear hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. Plus, tough cartridge bearings roll smooth for the long haul.

The Deadbolt Ultralight Thru-Axles are offered in a 6mm flat button head design, for a flush, clean look. Lightweight, easy to use, and secure. - CNC-machined from 7000 series aluminum - Designed to fit all current Salsa thru-axle frames - For other frames, check with the manufacturer for compatibility and other specifications - 6mm hex wrench required for installation

Surly's 50mm wide Rabbit Hole Rim lets you build a wheel that accepts a tire with a large footprint for outstanding control, and traction. This anodized-aluminum hoop has 64 spoke holes and can be built centered or offset. Also, material has been removed everywhere possible (without affecting strength) to keep the rim as light as possible for quick acceleration.

The XMC 1200 SPLINE is for anyone who enjoys high-speed climbing and descending. Fit with tubeless tires, the full carbon hookless rim massively reduces the chance of punctures, is super-light, and at 30mm rim width, works to perfection with wide all mountain rubber. The SPLINE hub is the lightest wheel hub ever built by DT Swiss, together with the bladed top end spokes and a perfect DT Swiss wheel build, it complements the carbon rim for the ultimate trail bike wheel set.

The Zipp 202 Firecrest Carbon Clincher retains a classic 32mm rim depth, but with a sturdier 25.4mm rim width for all-around use. This legendary climber's companion weighs just 1,450g, and features Sapim CX Sprint spokes to optimize torsional and lateral stiffness. Laced to the maintenance-free Zipp 77/177 hubset, you can count on best-in-class durability no matter where you decide to ride. Confident stopping power comes from a combination of heat-resistant resin used in the 202's construction and Tangente Platinum Pro Evoke brake pads that provide all-conditions reliability. Zipp includes an integrated valve extender with valve-core wrench, rim tape, and quick release.

Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM'S 900 hubs are ready for the challenge. On the inside, the smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes - Fully convertible with tool-free end caps - BOOST variants - 24, 28 or 32 spoke holes

Hub End Caps for Go-Devil Hubs. Caps for quick release, 12mm, and 15mm available.

Axle conversion kits for Race Face Turbine/Aeffect hubs. - Select from front or rear applications

Replacement Freehub Body for Trace hubs.

Being a company of mountain bikers, when Race Face set out to design a new wheel, their goal was simple, "Make the wheel we want to ride." HUB - Large oversized flange for improved bracing angle - Larger bearings - No bearing adjuster - Wider bearing stance - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - 30mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - New stronger alloy for highest impact resistance of any Race Face or Easton rim - High gloss black water transfer logos

Boasting a 30mm internal rim width and increased strength, the Aeffect R is built to shred aggressive all-mountain trails and Enduro races. In addition to a great rim, the Aeffect R incorporates a new Race Face Trace hub design with full cartridge bearings for extended life and durability. The hub also boasts a competitive 9.2-degrees of engagement using a durabl 3 pawl design. These hubs are tough, think a clydesdale with a motor kind of tough. Aeffect wheels can handle almost anything you can throw at them. - Brushed finish, water transfer graphics - One spoke length throughout wheelset - Rim decal kits available separately in 8 colors (sold separately) - 9.2-degree hub engagement - Standard 6 bolt brake rotor mount - Extra spokes (5) included with rear wheels - Straight pull Double Butted spokes with Silver Brass nipples

Stiffer, stronger, and ready to party, ARC 31 Carbon Rims take notes from Race Face's Next R carbon wheelset; built to handle the most challenging days on the trail. With one of the lightest enduro rims on the market, you can tackle the climbs with speed while you hit the descents with confidence. The ARC 31 have been redesigned to take full advantage of the benefits carbon fiber has to offer. Featuring a generous 31mm internal width for modern tire widths with lower pressures, and available in 28 and 32 spoke holes with incredible stiffness all wrapped up in a mere 445g (27.5). Lace these rims to your favorite hub and you’ve got a world class wheelset ready for action.

WTB's proprietary 4D spoke drilling prevents binding and lateral loading of the spokes, while the spoke bed itself has been updated to provide a more compatible interface between the spoke and rim. Integration of the all-new Solid Strip on our TCS 2.0 rims delivers the easiest to mount and most reliable tubeless system we’ve ever made. Available in widths ranging from i23 to i45, because all bikes should benefit from lightweight rims. Features: - TCS 2.0 creates a more robust, easily installed and dependable tubeless system. - A recessed channel along the center of TCS 2.0 rims allows installation of the all-new Solid Strip, which prevents tubeless tape from sagging at the spoke holes and results in a smooth, consistent interface between the tire and rim. - 4D angled spoke drilling eliminates binding and lateral loading, and disperses tension more evenly over a greater area

The ARC Offset rims utilize an asymmetrical design to optimize spoke tension balance, wheel durability, and wheel stiffness. Its 6069 Alloy construction provides a superior strength-to-weight ratio, significantly improving toughness. - Offset nipple bed for improved spoke tension balance and wheel strength/stiffness - Strong tire retention bead - Tubeless ready

Wheels are the first point of contact between you and your bike, and the trail you’re riding on. And while wheel sizes and standards continue to develop significantly year on year, often to both the rider and the industry’s dismay, very little innovation has been seen in the compliancy and responsiveness of the wheel as this first, most important contact and conductor. What Spank has seen in recent years is that bike suspension is continuously evolving and adapting to compensate for stiffer frames and more rigid, deeper profile carbon fiber rims. This overall stiffer rig is being softened, or counter-acted by both bike suspension, and tire design — not to mention the ever lower and lower tire pressures riders are running. Rider position (wider, lower, more forward) is also being impacted directly by the bike frame and cockpit geometries which is constantly aiming for a better riding feel. So surely it is overdue time to re-examine how the engineering of the wheel can become an active contributor to the efficiency of the overall set up. Spank Industries has done just this. - Low sectional profile height and wide width, adds radial compliance, while keeping high lateral stiffness. - 30mm internal width extremely versatile, fitting tires from 2.0” to 2.6” perfectly, and even allowing + size tire use, without negative squaring off of tire profiles. - Ideal for Trail/AM/Enduro bikes looking for a wide profile, without the weight penalty

- Unique profile with low sectional profile height and wide width, which adds radial compliance, while keeping high lateral stiffness. - Improved radial compliance for better traction over bumps and chatter, while reducing negative feedback to the rider. Performance and comfort enhanced. - Vibrocore inner well reduces the transmission of harmful vibration frequencies, meaning less vibration for the suspension and rider, also increasing the fatigue life of the rim. - 30mm internal width is extremely versatile, fitting tires from 2.0” to 2.6” perfectly, and even allowing + size tire use without negative squaring off of tire profiles. - Ideal for DH and Freeride.

- Braking surface: Machined aluminum - Rim weight: 455g - Finish: Black Anodize/Vinyl Decals - Type: Tubeless-ready clincher - Rim material: EA90 aluminum/welded - Rim depth: 27mm - Internal rim width: 19.5mm - External rim width: 24mm - Spoke holes: 24, 28, 32 - ERD: 580 - Max tension: 1200 N/122 KGF

The PR 1600 SPLINE 32 is characterized by its super stiff yet lightweight medium-profile aluminum rim. The use of the PHR nipple system allows a very low weight. Stiffness is generated via the big cross-section and thanks to the 18mm internal width and the tubeless-ready design, it is ideally equipped for the use of modern road bike tires. The PR 1600 SPLINE 32 is a wheel that excels on any terrain, transfers every bit of energy into forward momentum, and takes every corner with Swiss precision.

Zipp Speed Weaponry Freehub Bodies - Material: Aluminum

The Clutch Hub is a traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong FULL 14mm axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment, which can be done with a 2.5mm hex key through a hub shell access hole (can be adjusted without removing the wheel), and an improved plastic hub guard spec. Same Clutch coaster hub you’ve come to love, but with a few upgrades. Features: - Maximum strength axle design - Super-durable bearing arrangement throughout - 2.5mm hex key slack adjustment through hub shell access hole. No wheel removal required. - Super-durable drag mechanism design - Crankflip ready Improvements Over the Clutch V1: - 14mm chromoly axle bolts on both the drive and non-drive side for greater reliability - Improved clutch engagement - Improved manufacturing precision throughout - More slack than the V1 hub - All-new durable proprietary plastic spec for the removable hub guard Specs: - 36-hole, 2014-T6 aluminum shell - 9T Driver - Left or right hand drive - 22 oz / 623g Guard Options: - Plastic hub guard included (but optional to use) - Alloy hub guard also available