- AXS enabled for easy monitoring and firmware upgrades - Bluetooth Low Energy and ANT+ compatible - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - Uses a common CR2032 battery that last for 200 riding hours and changes without tools - Power-upgrade compatible with the following RED and Force eTap AXS cranksets: RED 1x: 36T-46T, Force 1x: 36T-46T, Force 2x: 33/46, 35/48 - Bolt Circle Diameter (BCD): 107 BCD - Power Meter Type: ANT USB
DZero is Quarq's next-generation power meter platform for those who live to be challenged, pushed, and tested in the toughest scenarios imaginable. Now Quarq has introduced a DZero spider designed to replace the factory spider on Specialized's S-Works carbon crankset. Quarq DZero for Specialized embodies 10 years of Quarq advances in power meter technology, plus new features such as dual Bluetooth low energy and ANT+ wireless data transfer, revised circuitry, a new strain gauge design and the Qalvin BLE app. You also get AxCad accelerometer cadence, the easy-to-replace CR2032 battery, an IPX7 waterproof rating and a 2-year warranty. Features & Benefits: - Bluetooth low energy technology and ANT+ wireless data transfer - AxCad – no cadence magnet required - 10K Temperature Compensation - Battery – CR2032, 200-hour battery life, change without tools - Power Balance - OmniCal – swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy – within 1.5%, measuring both legs - Free firmware upgrades with the Qalvin app Essential Details: - Traditional 5-arm spider compatible with Specialized S-Works Carbon Road Crank Arms from 2013-Current. - Available in 130 BCD and 110 BCD. - Replaces the standard spider. - A Specialized lockring tool is required for installation.
- AXS enabled for easy monitoring and firmware upgrades - Fully integrated power meter into a direct mount chainring - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - 8-bolt direct mount compatibility only to RED and Force eTap AXS cranks. - Speeds: 12 - Chainring material: Aluminum - Power Meter Type: Ant USB
Planet Bike's Protegé 5.0 is a great, no-nonsense computer. You want to know how fast you’re going, or how far you've ridden, or the time? It’s right there in big, bold numbers. In fact, this clever computer displays 4 readings at once so you have the data you need at a glance. The 5.0 mounts easily on your handlebars.
The ultimate in GPS technology, the new Mega XL is a must have device for serious road, gravel and mountain bike riders and racers as well as long distance adventure riders. Its 2.7-inch, 240x400 high-resolution display is 50-percent larger than the Super GPS and includes the option of vertical or horizontal viewing modes. - Durable, composite construction - Super accurate, advanced data recording system combines GPS plus Glonass satellites - Simultaneous ANT+ and Bluetooth Smart connectivity - Multiple real-time features when paired to the Lezyne Ally app - Barometer and accelerometer - Simple setup through Lezyne Ally phone app - Import tcx and gpx files - Trainer Mode - Multiple bike profiles - Full navigation - Custom route building - Intuitive four button operation - Lithium polymer battery provides up to 48 hours of runtime - Micro USB rechargeable - Stores up to 800 hours of ride data - Customizable fields and page count (up to 10 fields) - On screen preloaded maps - Custom alerts and auto presets - Extremely weather resistant - Includes X-Lock Standard Mount Mega Loaded Kit Contains: - GPS Computer - Heart Rate Flow Sensor - Speed/Cadence Flow Sensor - Direct X-Lock Mounting System - Micro USB charging cable
Universal Fit The XL Smartphone Holder is designed to securely hold iPhone 6 Plus, 6s Plus, Android Devices, and most larger style smartphones with protective cases. Compatible with devices/cases up to: 7.8 x 3.5 x 0.5 inches (H x W x D) Easy, Instant Removal Don't waste time prying your smartphone out of bulky holders or changing between cycling-specific phone cases. The Smartphone Holder features a durable elasticated bungee for easy in/out access of your device. Although engineered to withstand heavy road vibrations and other bumps, the secure bungee is still stretch friendly. Positioning On Your Terms Delta understands that your handlebars are very precious real estate. That is why they include a stem cap and handlebar mounting bracket with each Smartphone Holder. A clever ratcheting system on each mounting bracket allows you to adjust the viewing angle of your device. Weather Protection Bag (Included) Protect your device from rain, sweat, etc.. with the included waterproof baggy. Touchscreen is still accessible while your smartphone is in the bag. Securing Cam Lock The securing cam lock adds additional security to your device during those extra bumpy moments.
The Beetle 6 is a larger version of the BiKASE Beetle that has been stretched to accommodate the iPhone 6/6S Plus and other large mobile phones. Storage space underneath phone compartment for energy bar, wallet, keys, or tools. Mounts securely to the top tube using Velcro straps and shock cord around stem. - Pocket fits iPhone 6/6S Plus and other larger smart phones - Clear cover allows device visibility and operation - Mounts to top tube or stem - 2 multi positional straps & shock cord for mounting - Internal lastic stiffener and anti-slip fabric bottom - dual zippers - 8" x 4" x 2"
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Garmin Low Mount to add a Garmin GPS directly to the Blendr stem mount. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Garmin GPS - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
Planet Bike's amazing Protegé 9.0 is perfect for riders who want maximum information with minimal fuss. It boasts the important functions you expect like average speed, a speed comparator, a dual odometer so you can use it on 2 bikes, and it displays temperature, too. You can see any 5 of these on its easy-to-read 4-line display. The 9.0 installs easily on your handlebars.
The BC 9.16 is the ideal computer to improve fitness. In addition to displaying maximum speed, the BC 9.16 estimates the number of calories burned based on speed and duration. Bike Functions: - Speed (kph/mph) - Average speed - Comparison of current/avg. speed - Maximum speed - Trip distance - Total distance - Ride time - Total ride time - Clock (12/24h) - Calories - Total Calories Features: - Full text display with 7 languages - Predefined tire sizes - Ride time up to 100 h - Automatic start/stop (ATS model for 2 hrs. in standby mode) - Watertight in accordance with IPX8 - Tool-free mounting
Get more data from your rides with the Bontrager Interchange digital combo speed and cadence sensor. This ANT+ 2.4 Ghz is designed to work with Bontrager Node wireless computers. It also works with many other ANT+ enabled devices. Sensor adjustment is easy with the adjustable arm. • ANT+ 2.4 Ghz and Bluetooth Smart wireless digital speed and cadence sensor • ANT+ and Bluetooth Smart allow simultaneous use of Trip 300 and smartphone • For use with many ANT+ and Bluetooth Smart wireless technology enabled devices • Independently adjustable arm for precise alignment of speed and cadence sensors • Includes Bontrager wheel magnet and crank cadence band • Includes silicone mounting strap to fit most chainstays and CR2032 battery • Visit www.thisisant.com/directory/ for compatible ANT+ devices • Visit www.bluetooth.com/pages/bluetooth-smart-devices.aspx for compatible Bluetooth devices
The Smartphone Caddy II is designed to securely hold iPhone 6, 6s, SE, 5, 4.7" Android Devices, and most smartphones with protective cases. Don't waste time prying your smartphone out of bulky holders or changing between cycling specific phone cases. The Smartphone Holder features a durable elasticated bungee for easy in/out access of your device. Although engineered to withstand heavy road vibrations and other bumps, the secure bungee is still stretch friendly. Delta understands that your handlebars are very precious real estate. That is why they include a stem cap and handlebar mounting bracket with each Smartphone Holder. A clever ratcheting system on each mounting bracket allows you to adjust the viewing angle of your device. Protect your device from rain, sweat, etc.. with the included waterproof baggy. Touchscreen is still accessible while your smartphone is in the bag. A securing cam lock adds additional security to your device during those extra bumpy moments. Compatibility: - Devices/cases up to a maximum: 5.5 x 2.9 x .625 inches (H x W x D) - Handlebars up to 1-3/8-inch diameter
Replacement chainstay cover for DuoTrap S Digital Sensor
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Garmin High Mount for a clean, flush look that securely holds your Garmin centered over the stem. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Garmin GPS - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
Blendr is the ultimate system for clean and easy integrated installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr GoPro Mount for a clean, flush look that securely holds your GoPro in a centered location. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for GoPro camera - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
Easily integrated Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount front light and camera accessories on the front of your Bontrager Circuit MIPS road bike helmet. - Tested with an accelerometer for intended breakaway point if involved in a crash
PWR Rider is a 450 lumen bike light that can also be used as a power bank. Includes the option to program your brightness and runtime (through ModeMaker app), then use your remaining battery to charge your devices. The light outputs in an elliptical beam for broader, brighter road coverage; has a 2 hr runtime at max 450 lumens and 4 smart battery indicator LEDs to let the rider know how much charge is left in the light. The two “Charger” lights come with 5 pre-programmed modes, just in case you haven’t yet discovered the ModeMaker app. The PWR Rider will last 2 hours at 450 lumens, and for those with stamina, will run at 200 lumens for 5 hours. Program your modes: The ModeMaker app lows you to design the modes for any PWR bike light. Simply plug in your light, then select and tailor modes from the menu. You can do things such as control brightness, adjust runtimes and add new light modes. Charge your devices: Rear of the light is a USB rechargeable power bank. Use this to charge your phone, GoPro or cycle computer on the go. 1 hour riding @450 lumens means you can top up charge your iPhone by 35%. Charge time 3.5 hours. - Light output: 450 Lumens - Power bank: 2200 mAh - Dimensions: 122 x 30mm - Weight: 115g - What's in the pack: Light, Silicone Strap, USB Cable, Hex Key
Performance GPS Cycling Computer with Mapping - Dynamic performance monitoring provides insights on your VO2 max, recovery, training load focus, heat and altitude acclimation, nutrition, hydration and more - Cycling safety features include new bike alarm, group messaging and tracking, incident detection and compatibility with Varia rearview radar and lights so you can see and be seen - Includes routable Garmin Cycle Map with popularity routing — which helps you ride like a local — plus off-course recalculation and back to start; mountain biking model has integrated Trailforks data, including trail difficulty ratings - Customize with free apps, widgets and data fields from the Connect iQ Store - MTB dynamics track jump count, jump distance and hang time as well as Grit, a measure of the ride’s difficulty, and Flow, which tracks the smoothness of your descent so you have a score to beat next time - Battery life: up to 20 hours with GPS; extendable up to 40 hours with the optional Garmin Charge power pack or in battery save mode Who cares that the Edge 530 cycling computer offers dynamic performance monitoring and insights to help you improve? You do. So, whether you’re a podium finisher, Kona qualifier, gravel grinder, straight-shaven, urban pedaler, dirt ball or somewhere in between, Edge 530 is ready to roll as your new riding partner. In The Box Device Only - Edge 530 - Standard mount - Flush out-front mount - Tether - USB cable - Documentation Sensor Bundle - Edge 530 - Standard mount - Flush out-front mount - Speed sensor - Cadence sensor - Heart rate monitor - Tether - USB cable - Documentation
- Micro Mount for Phones - Aluminum and composite construction securely holds any phone with any case for minimalist profile - Unique patent-pending design with proprietary stretch material grips your phone - Easy mounting under any standard stem. - Tighten to stem cap 6Nm torque.
Bontrager's SpeedTrap Digital Speed Sensor conveniently plugs into any Bontrager fork with SpeedTrap technology for the ultimate in convenience. And, it wirelessly transmits speed data to your ANT+ cycling computer.
Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. Key features: - Universal crank magnets work with any cadence sensor - Get the perfectly sized magnet, sized right for your bike and sensor - 20mm cadence magnet improves signal for wider gaps between crank and sensor
Keep your computer and sensors ready for every ride with replacement batteries Key features: - CR2032 battery is used for most Trek and Bontrager computers - 23AE battery is used for the Bontrager Interchange Analog Wireless Sensor - LR44 and L1154 batteries are identical and used in Bontrager SpeedTrap Sensor
Mount your Garmin Edge computer with the Quarter Turn Bike Mount. It includes the bike mount, rubber disc, and elastic bands to secure the Quarter Turn to your stem or handlebars.
The crankset is the heart of your bicycle and where you’ll find the SRAM RED Quarq power meter. The sole job of the crankset is to convert the effort from both legs to forward motion. It is the perfect place to measure power. This power meter works for every discipline: Road, triathlon, time trial, and cyclo-cross. The chainrings are replaceable should your bike, discipline, or ability change. - A direct force power meter that measures total power output from both legs with +/-1.5% accuracy - Works for every discipline: Road, triathlon, time trial, and cyclo-cross - No compromises on materials, shifting, wheels, or pedal choice - Proven by pro teams and athletes throughout the world – Cobbled Classics, Giro d’Italia, Tour de France, Vuelta a España, World Championships - Number 1 at the Ironman World Championship for the last three years - Uses a hidden bolt to mount the chainrings – compatible SRAM chainrings ensure the derailment pin lines up behind the crank arm - 10K – programmed with over 10,000 data points to eliminate temperature effects on power measurement - AxCad – A multi-axis accelerometer switches the power meter on and measures cadence, simplifying installation and operation - Breakthrough Materials – Exogram hollow carbon fiber crank arms – the lightest, strongest crank arms SRAM makes – minimize weight and maximize speed [ELSA RS, ELSA R and SRAM RED] - Easy to use (and reuse) – LED indicator and visible ANT+ ID - The replaceable CR2032 battery never leaves you without power - Manual and automatic zeroing make it truly set and forget - Built to Last – IPX7 waterproof rating, 2-year warranty, free firmware updates, and acclaimed international support - Moves with you from bike to bike - With Quarq's free Qalvin app – available for Windows, Mac, iOS and Android – you can set the zero offset, check battery voltage, run diagnostics, and perform firmware updates for free Arm Material: Carbon arms, Machined alloy spider Weight: 778 grams (GXP 172.5mm 53x39 BB not included) * Chainrings and BB sold separately
- Replacement parts and accessories for SpeedTrap Digital Speed Sensor - Fork Cap covers SpeedTrap pocket when sensor is removed - Spacer is required on some forks to position sensor closer to wheel magnet
SRAM's QuickView Computer mount delivers an uncomplicated computer mount that‘s easy to install, lightweight, and above all, vibration and slip-free. At only 20 grams, with a single torx T25 bolt, flexible mounting clasp, and a 1/4-twist mount, it installs quickly, simply and securely on any 31.8mm handlebar. It works great with computers that use a 1/4-turn twist lock interface.
Be it the fireworks of a finale, an ideal rhythm, climbing on the top, or a deep, dark place extracting the last kilojoule of effort on your bike split, you want to adjust your gear with the twitch of a finger. eTap Blip satellite shifters allow you to shift when you want, where you want. - Limitless remote shifting positions for drop and aero bars - Wired shift buttons can be positioned however the rider prefers - Connect to Blip Box or drop bar eTap levers - Compatible with SRAM RED eTap shift/brake controls
The new Go Big Pro is the next generation in K-EDGE's industry leading GoPro style interface Camera Mounts. The new mounts provide easier installation with a stronger more secure platform for your action camera, available in 31.8 and 35mm options. Key Features and Benefits: - STRONG – CNC machined aluminum mount engineered to hold your camera securely in place no matter the terrain. - STABLE – High quality video footage with a solid platform to prevent shake you would get from a plastic option. - POSITION – Out front and low, the ideal location for mounting from the bars and the most popular position for on-bike footage. - EASY – Hinged handlebar clamp for ease of installation and removal. Simple 1-bolt hinged clamping system, quick and easy. - CNC Machined 6061 T6 Aluminum - Compatibility – fits 31.8mm diameter bars; all mounting hardware included; works with all GoPro HERO Original, HERO2, HERO3, and GoPro Session Cameras. Shimano CM-1000, Garmin VIRB, and Garmin VIRB X. Any action camera utilizing the GoPro interface. - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded. - Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. *The NEW K-EDGE Handlebar Computer and Camera Mounts (1420, 1440, 1500, 1505, 1605, and 1905 series) are built in three parts. An integral part of our mounts are the connection where the arm and clamp are joined by two assembly bolts located on the underside of the mounts. THESE ASSEMBLY BOLTS ARE NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. The torx head bolts are installed using a permanent thread-lock compound. Doing so will void all warranties. Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Garmin EDGE instructions that recommend use of the provided tether leash.
This adjustable chest strap is compatible with Sigma's line of heart rate monitors and sport computers.
Out-front computer mount for Wahoo Elemnt computers. This is the next generation of industry-leading Wahoo Computer Mounts – stronger, easier, more versatile, and more stylish design to compliment your Wahoo and your bike. The ultimate upgrade! The advanced co-polymer Wahoo insert locks your computer in place with strength and security. Designed and tested extensively so that our replaceable insert breaks away instead of your computer tabs in the event of a crash or mishap. *Compatible with the NEW Wahoo BOLT and Wahoo Mini - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Wahoo Specific Co- Polymer - Compatibility – 31.8mm and 35mm diameter handlebars. - New clamp design is hinged for ease of installation. - Made in Boise, Idaho, USA. - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded. *Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. K-EDGE Combo Mount are NOT DESIGNED to hold a Cycliq Fly 12. (Cycliq Fly 12 users should choose the K-EDGE K13-410, K13-420, K13-2450 GO BIG camera/light mounts.) K-EDGE mounts co-polymer plastic computer inserts are designed to hold the corresponding computer ONLY (Garmin- black, WAHOO- blue, SIGMA – red), and breakaway in a crash to protect the computer body. K-EDGE Combo Mounts are designed to hold Garmin, WAHOO and SIGMA cycling computers and Go Pro, Shimano, Garmin VIRB X sized cameras and standard sized cycling lights (Light and Motion Urban or Niterider). Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Garmin EDGE instructions that recommend use of the provided tether leash.
Page 1 of 6 Next page